Your Files on circuit board

Submitted by Lonnie on Thu, 08/16/2012 - 21:14
Forums
The Stella Amp!

Hi John, is it ok to print and use you drawings of the circuit board on you site to make a copy of the circuit board at home? If so what layers would I print to be able to etch top of circuit board and what layers do I need to print to etch the bottom part of board. I will not do this of course if you did not intend for anyone to make a copy of you circuit board.

Thanks,
Lonnie

Member for

12 years 1 month

John

Sun, 08/19/2012 - 15:09

Permalink

Of course! The Stella Amp is open hardware after all. As for which layers, you mean, which layers in the eagle file? I think they are called top copper and bottom copper, but I'm not sure, as I'm not at my main computer at the moment.

Member for

10 years 11 months

Lonnie

Sun, 08/19/2012 - 16:08

Permalink

Thanks John. Your amp sounds great on your video.

Member for

12 years 1 month

John

Wed, 08/22/2012 - 21:19

Permalink

Thanks!